Matters needing attention during the installation of the Alloy manual fire water foam monitor are:
- The installation bracket of the Alloy manual fire water foam monitor must be stable. The installation bracket needs to be shockproof and anti-shaking. The fire water monitor must not shake when it is rotating and spraying water.
- Strictly implement the national standard to facilitate the later acceptance of fire protection.
- If the fire water monitor makes a wrong action during the installation and commissioning process, you should press the emergency stop button on the on-site operation panel in time to cut off the power and find out the reason.
- At the installation and commissioning site, avoid strong electromagnetic field radiation, electric welding or open flame operations. If unavoidable, switch the fire water monitor system to manual mode and adjust the parameters.
- When hoisting the fire water monitor, the nozzle sensor of the fire water monitor should be properly protected to prevent the sensor from being damaged and malfunctioning.
- The wire harness of the fire water monitor should be neatly arranged after installation, and a certain margin should be left to facilitate the rotation and detection of the fire water monitor. The wire harness should not produce friction when the fire water monitor rotates.
Professional and technical personnel guide the best
It is recommended that the installation of the Alloy manual fire water foam monitor system be carried out by a fire protection installation company with corresponding installation experience or by the manufacturer’s installers. After installation, the debugging should be carried out by the manufacturer’s professional technicians. If we are not familiar with the functions and precautions of the fire water monitor related components, it is easy to install rashly. Caused damage to the fire monitor system components during the installation process, affecting the entire system, resulting in a prolonged installation process. If you encounter other problems during the installation process, you should communicate with the manufacturer’s technicians in time, and install the fire water monitor system under the guidance of the manufacturer’s technicians.